Wall mount bracket for a Flic Hub LR

A very simple wall mount bracket/holster to hold a Flic Hub LR. I have one of these devices managing a few of the Flic "smart buttons" around the house and created this model so it could hang on the inside of a cupboard.

There is enough clearance at the bottom to allow connections to all the ports on the hub. of course you can fit the hub the other way up with the cables at the top if you prefer, or even mount the whole thing sideways if that makes the cable routing easier.

I recommend printing this upright, i.e. standing on the narrow end with the little flange around it. You'll probably need to enable "brim" in your slicer to make sure there's enough contact area with the print plate, but that way up it will print without supports.

I printed mine in white PETG which matches the hub nicely. Unfortunately that means my photo is a white hub in a white bracket on a white wall, which isn't very exciting! As with most of my designs, it's functional rather than pretty!