Dometic RV fridge door keeper
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Keep your fridge doors in a good place while in storage
- Ocena
- 5 / 5
- Polubienia
- 20
- Pobrania
- 80
- Wydruki
- 0
- Wyświetlenia
- 550
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Kitchen
- Licencja
- Creative Commons — Attribution
In storage, you want to keep the doors open to prevent mildew, but not have them flailing around. This door keeper solution is for Dometic brand fridges with an upper freezer and lower fridge, with a 2" wide metal strip across the front.
The mount base is held on by six 18mm x 2mm magnets. Print with the outside down on the build plate. Superglue the magnets in place.
Two post lengths are included. Use the 65mm post if your fridge has wood paneling on the outside, otherwise use the 55mm post. The post fits well into the mount base when printed on my Bambu P1S. Scale as needed if too loose or sung. Glue the post into the base with superglue.
Print two pegs. These just sit in the post holes.
I printed in PETG with no supports. Fusion 360 model included.
Did you build it? Please leave a comment and rating.
If you really love it you're welcome to throw me a bone. Thank you. :)