Gridfinity Duel NEIKO Digital Caliper Storage
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds 6 in (150 mm) and 12 in (300 mm) NEIKO Digital Caliper and accessories.
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 189
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Holds 6 in (150 mm) and 12 in (300 mm) NEIKO Digital Caliper and accessories.
Amazon Links:
https://www.amazon.com/Neiko-01407A-Electronic-Digital-Stainless/dp/B000GSLKIW/ref=sr_1_3_pp?sr=8-3
https://www.amazon.com/Neiko-01407A-Electronic-Digital-Stainless/dp/B000EJUBBU/ref=sr_1_3_pp?sr=8-3
I find the NEIKO brand to be a good balance between value and quality/reliability. They may look like whatever Harbor Freight is selling, but the rails are beefier, and I don't seem to have to reset zero nearly as often if I open/close them too fast.
I designed this holder to take advantage of the foam inserts that come with the cases. The cavity for each caliper is a near-perfect fit for the inserts. The foam inserts are easy to remove and replace if you ever want to put them back in the cases.
I don't know about yall, but I certainly don't have any machine that can print a 12-gridfinity-unit long piece, but I found the dovetail cut feature in Prusa Slicer to be the perfect tool for the job. I had to cut it up into three pieces to print it on my MK3. I did have to add a tiny bit of paint-on support on some of the gridfinity geometry around the cuts. See the screenshots.
If you use the included 3mffile and choose the open as project option, you can use the same cut locations and support that I used in my print.
The holder also holds the screwdriver that was included with the 6-inch calipers, as it is needed to change the battery. Newer versions of the 12-inch may also have this feature, but mine do not.
Lastly, there is a space to hold an LR44 Battery Case. This is an excellent model by @HobbyCNC_458581:
Hobby CNC has several sizes available and the y work great.
I'm also including a version that does not have the cutout for extra tools.
If you only have one of these calipers and want to use the Fusion File, or the STEP file to remix a single holder using the foam insert geometry, that would be great!
Feel free to message me, or comment if you have any questions, and please upload your makes!