Nitrate 17 (N17)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a full size angled talon fed nerf stringer that is based on the Glock 17 gen 4
- Ocena
- 0 / 5
- Polubienia
- 8
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 199
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
********This Blaster is intended to look like a real firearm, I highly recommend using a orange muzzle device********
UPDATES:
5/27/2025-removed faulty trigger spring, fixed slide tolerances, fixed mag indent
(All Muzzle Devices are cosmetic and have no function)
Hardware Required:
-2 M3x15 bolts
-2 Small bungee chords
Recommended Print Settings:
Filament:
PLA (different settings are needed for different filaments).
Supports:
yes.
Rafts:
no.
Brim:
highly recommended for printers in nonstable temperature climate, otherwise no
Infill:
20%+
Print Bed Size:
160mm in length at least for printing properly.
THESE MODELS ARE NOT MEANT TO COMPETE, OR COPY THE PRODUCT THAT THIS MODEL IS BASED OFF OF.