1 / 3
Prusa Core One Magnetic Top Cover - 8x3mm Magnets Remix — zdjęcie 1
1 / 3

Prusa Core One Magnetic Top Cover - 8x3mm Magnets Remix

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Frame parts for Magnetic Top Cover, remixed for 8x3mm magnets. Clean STEP remix with snap-fit chamfers for glue-free ass

Ocena
5 / 5
Polubienia
5
Pobrania
48
Wydruki
2
Wyświetlenia
238
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I wanted to use the Prusa Core One Magnetic Top Cover design for my CoreOne, but since I only had 8x3mm magnets available, I decided to remix the frame parts (front, back, and sides) to accommodate them.

While a similar version for 8x3mm magnets exists, I noticed some issues with it, so I decided to do it properly - remixed directly from the original STEP file with properly recreated stepped chamfers for a perfect snap-fit.

With my printer and settings, everything fits together nicely as a snap fit - no glue required, though results may vary depending on your printer's tolerances!


Features

✅ Adapted for 8x3mm magnets instead of original size
✅ Compatible with hinged top cover design
✅ Snap-fit assembly - glue-free installation (tolerance-dependent)
✅ Stepped chamfers for smooth fitting
✅ Includes front, back, and side frame parts


Print Settings

  • Print orientation: Text side down

  • Material: PETG or ASA

  • Nozzle: 0.4mm

  • Layer Height: 0.20mm Structural

  • Infill: 20% Adaptive Cubic or Gyroid

  • Walls: 3

  • Supports: No


Used Magnets

8x3mm neodymium magnets (holding force ~1.3kg)

🇨🇿 Available at: https://www.unimagnet.cz/neodymovy-magnet-kotouc-8-mm-v-3-mm-sila-1-3-kg_z11/


Required Parts

From this model (remixed for 8x3mm magnets):

  • 1x Back frame

  • 1x Front frame

  • 2x Side frames

From original design:

  • 1x Frame_Front_Left

  • 1x Frame_Front_Right

  • 1x Frame_Back_Left

  • 1x Frame_Back_Right

  • 1x Frame_Side2

  • 1x Frame_Slide_Cover

  • 2x Frame_Tab

→ Main design: Prusa Core One Magnetic Top Cover with Integrated Vent Handle

Tagi