Elo I-series 3.0 15 inch vesa table stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
VESA table stand for a decent point-of-sale/home assistant tablet
- Ocena
- 5 / 5
- Polubienia
- 3
- Pobrania
- 22
- Wydruki
- 1
- Wyświetlenia
- 215
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Office
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Thanks to @shanelord_111630 for the bootstrap.
A bunch of folks in the home assistant community bough these Elo 15" I-series 3.0 tables for pennies on the dollar - what ensued was a community effort to update and get a variety of useful apps to breath new life into these very capable devices and avoid e-waste Elo AIO Touchscreen as a Dashboard Display
This extends the original mount to account for a larger size and uses 75x75 VESA pattern that works with the PoE module installed. v1 has the same angle as the original and v2 is 15 degrees steeper for a more upright look. I also added a second brace to avoid bounce.
Printed on a flashforge adm5 pro with walls set on 3, make overhangs printable set, and maximum angle set to 25 degrees. That makes the whole thing printable without supports even though the holes get a little messed up - a little bit of elbow grease will get them started.