OpenSlider XYZ - 3-Axis Motorized Camera Slider - Open Source
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The most up to date version of this project as well as a bill of materials and instructions are available on GitHub:…
- Ocena
- 0 / 5
- Polubienia
- 41
- Pobrania
- 126
- Wydruki
- 0
- Wyświetlenia
- 1773
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Share Alike
The most up to date version of this project as well as a bill of materials and instructions are available on GitHub: https://github.com/Adamslab/OpenSlider
OpenSlider XYZ is a motorized slider with multiple axis of rotation, built using common hardware and 3D printed components. I originally designed this project a few years ago to film Octolapse timelapses.
The goal of OpenSlider is to provide a robust, open source slider platform to fill a variety of needs at a low price point.
The slider is designed with ease of printing and assembly in mind. No support material needed. PETG or ABS is recommended.
You can contribute to the project via Discord (Link on the GitHub)
Print Settings
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
25%
Filament: Any PETG or ABS
Category: DIY