Wall mount for 10L or 20L Buckets
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I needed to mount a few buckets up off of the floor at work and I couldn't find a design so I came up with this
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 42
- Wydruki
- 0
- Wyświetlenia
- 159
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Public Domain
I needed to make some wall mounts to place some 10L and 29L buckets one.
The ones we use have a good sized lip around the edge of the bucket.
I designed this mount to screw to the wall and then the lip of the bucket fits on the lip of the design.
Both 10L and 20L buckets fitted perfectly on this.
There is space on the mount to put a printed 18mm wide label if you need to.
I printed these in black rPETG. I used 4 walls and 40% infill, to ensure they are really stong.
I put 4 holes in them for screwing them to the wall.
However the screws I used are rated for 91Kg each, so I felt 2 would be enough, but for if it is going on a wooden wall you still have the option of using 4 screws.