Honeycomb PegBoard Tool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Honeycomb tool holder for pegboards
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 25
- Wydruki
- 0
- Wyświetlenia
- 109
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Design Concept
The honeycomb tool holder is a remix of the original by user herbert. Great simple print to store your tools of different shapes and sizes.
Uses
I have a custom DIY made Pegboard for my work desk and the holes on the board have have non-uniform holes over the whole wall. While measuring I found that the closest I can get is some holes are separated 25mm apart from each other if measuring from the middle of the hole. I made a bunch of different holders for tools I have. All of the uploaded holders are made for holes that fit only boards that are at least 5.2mm in hole size and 25mm apart from each holes center.
Printing Suggestions
Best for strength is to print at least with PETG. Supports are required for the main body.
Assembly Instructions
Remove the supports and the pegboard can be mounted in the slots.
Attribution goes to herbert on Printables for the original design.