Shelly 1 PM mini Gen3 Case with different Cable glands and place for RC Snubber
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Shelly 1 PM mini Gen3 Case with two sizes of cable glands, place for Wago connector and RC Snubber
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 337
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
⚠ SAFETY & DISCLAIMER
This model has been tested by the designer for personal use only. It includes housing for electrical components and should only be used by individuals with appropriate experience and knowledge.
Outdoor use at your own risk. Please ensure compliance with local regulations and electrical safety standards.
The creator assumes no liability for improper use or damages.
Function and Purpose:
Designed for secure and weather-ready installation of the Shelly 1PM Mini Gen3, this compact housing comes in different versions for M16, M20 but also PG9, PG11 and PG13.5 cable glands. It’s ideal for garden setups, outdoor control units, or wherever smart switching meets the elements.
Although there are several other cases available there was no one fitting my needs. I wanted to choose the cable gland individually depending on cable thickness and include additional space for a rc snubber.
Technical specification
The model has been successfully tested with PETG on a „Textured PEI Plate” at 65°C.
The interior offers space for:
- 1 x Shelly 1PM mini Gen3
- 1 x Shelly RC Snubber
- 3 x Standard WAGO 221-412, 221-413 connectors
The case includes 4 mm holes for melt-inserts which are suitable for 3 mm screws (e.g. M3x12). Alternatively, you can use any other matching screw type. The lid holes have 3 mm diameter.
Optional Printing Tips
Ad some glue for better adhesion
No supports needed