Tormach CNC Pendant Holder / Shuttle Express Control Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holder that can be adhered to the monitor arm table, or even to the machine itself.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 53
- Wydruki
- 0
- Wyświetlenia
- 512
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a holder for the pendant that controls many of the Tormach CNC machines, such as the 15L Slant Pro, and the Tormach 1100 PCNC.
Also fits the Shuttle Express branded multimedia controller.
I was tired of the pendant constantly sliding off the monitor arm table, and being knocked around as I worked, so I created this model. Cut outs are placed around the model allowing for the USB cable to be routed through, and others for allowing your fingers to lift and grab the pendant out of the holder. The Tormach logo is featured for a little decoration.
Print Notes: Printed with MakerGear M3 and MakerGear PLA
- Printed at 0.2mm layer height with 25% infill
- 50mm/s Print Speed
-One Top Surface Skin Layer
-Turn on ironing for a better surface finish (duh)