Q2 Spool Holder Bracket plus Box Splitter Rotated
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rotated the bracket for the Q2 Box 4 to 1 splitter component to make it horizontal
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 101
- Wydruki
- 0
- Wyświetlenia
- 641
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Share Alike
Rotated the bracket for the Q2 Box 4 to 1 Splitter/Manifold to horizontal so that the 4 PTFE tubes entering the manifold have a lesser radius curve and a longer ‘straight path’ before reaching the manifold. Others found this orientation resolved filament loading errors. Q2 support just showed me/suggested the same orientation today. Note: You will need a longer PTFE output tube from the Splitter/Manifold to keep the curve radius of that piece acceptable. I used another model quick disconnect to joint the original PTFE and an extra piece to accomplish this. Fair warning - my filament occasionally catches at the junction - I will upgrade my extra PTFE tube (2.5x4 mm like on a Prusa) to 3 mm ID that QIDI says they're using on the Box to see if that helps, or find a better solution to join them. You could just replace the whole piece but I like being able to run filament from an external spool into the system (like TPU you shouldn't run in the Box) so I will work to improve that junction.
A user asked for a version where the 4-1 Hub points to the left of the machine so added it here.