1 / 13
AKASO V50 Elite – Pack 3 socles (Classique + Airsoft Helmets + Streaming 90°) — zdjęcie 1
1 / 13

AKASO V50 Elite – Pack 3 socles (Classique + Airsoft Helmets + Streaming 90°)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

FrançaisPack de 3 socles différents pour l’AKASO V50 Elite, modélisés à partir de ma maquette 3D (le dummy que j’ai…

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
81
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Français Pack de3 socles différents pour l’AKASO V50 Elite, modélisés à partir de ma maquette 3D (le dummy que j’ai uploadé avant). Tout est conçu pour être solide, léger et hyper pratique.

Les 3 versions :

1.Socle classique → pose bureau simple, stable, discret. Le basique qui fait le job. 2.Socle Airsoft Helmets → conçu pour rentrer dans TOUS les casques que j’ai testés (FAST, MICH, etc.) → acheté 3 casques différents (2 sur Tawangun, 1 sur Airsoft Entrepot) et ça passe partout sans forcer. Parfait pour POV airsoft ! 3.Socle Streaming 90° → version haute avec angle fixe à 90° → je l’utilise perso pour filmer mes imprimantes en overhead sur Twitch (https://www.twitch.tv/maxstasia/). Vue parfaite sur le plateau !

Imprimé surEnder 3 Pro :

  • Infill 15 %
  • Supports organiques (seulement où nécessaire)
  • Précision 0.08 mm (mode précis → sortie ultra propre)

Licence :CC BY-NC-SA 4.0 → remixa, adapte pour d’autres cams, partage… mais on reste non-commercial !

English 3-in-1 mount pack for theAKASO V50 Elite, based on my dummy model (uploaded earlier). All designed to be strong, lightweight and super practical.

The 3 versions:

1.Classic stand → simple desk base, stable and clean. The everyday one. 2.Airsoft Helmet mount → fits perfectly in ALL helmets I tested (FAST, MICH, etc.) — bought 3 different ones (2 from Tawangun, 1 from Airsoft Entrepot) and it slides in everywhere. Perfect for airsoft POV! 3.90° Streaming stand → tall version with fixed 90° angle → I use it live to film my printers overhead on Twitch (https://www.twitch.tv/maxstasia/). Perfect top-down view!

Printed onEnder 3 Pro:

  • 15 % infill
  • Organic supports (only where needed)
  • 0.08 mm layer height (precision mode → super clean finish)

Print Settings

Printer Brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

Yes

Resolution:

0.08mm

Infill:

15%

Filament: Kingroon PLA Black

Notes:

Français
Imprimante : Ender 3 Pro (mode précis)

  • Matériau : PLA ou PETG recommandé
  • Hauteur de couche : 0.08 mm
  • Remplissage : 15 %
  • Supports : organiques (uniquement sur le socle streaming pour l’angle)
  • Temps approximatif : 2–3 h par socle selon la version
  • Consommation : ~35–50 g par pièce

Orientation : poser à plat sur le plateau (le filetage GoPro vers le haut).

English
Printer: Ender 3 Pro (precision mode)

  • Filament: PLA or PETG recommended
  • Layer height: 0.08 mm
  • Infill: 15 %
  • Supports: organic (only needed on the streaming stand for the overhang)
  • Print time: ~2–3 hours per stand
  • Filament: ~35–50 g each

Orientation: flat on bed (GoPro thread facing up).

Category: Camera

Tagi