1 / 3
ABit  Fatal1ty AA8XE OTES Fan Duct — zdjęcie 1
1 / 3

ABit Fatal1ty AA8XE OTES Fan Duct

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a simple recreation of the ABit Fatal1ty AA8XE OTES cooling system fan duct.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
24
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Public Domain

ABit Fatal1ty AA8XE motherboard implements the OTES cooling system and uses a duct to draw air from the CPU heatsink through the VRM heatsinks and exhaust out the IO bracket. This duct was missing on my motherboard so I created this rough facsimile of the original's for functionality. 

Print suggestions:

  • Use a heat resistant material as the area it will be installed can reach 70C+ (I used PETG)

  • Print upside down with full supports.

Assembly Notes:

  • The ducting must be installed during the motherboard's installation to the case. One of the the motherboard mounting screws will become un-accessible once installed (the original duct was like this too)

  • The there are three screws used to mount this, 1x M3 or 6/32nd screw (depending on your case's mounting hardware) that is use to mount the motherboard and 2x 2.5M screws for mounting it to the fans mounting bracket.

Tagi