Lego Monster Trucks Wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple hanger to display the Lego technic Monster Jam trucks
- Ocena
- 0 / 5
- Polubienia
- 9
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 345
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Building Toys
- Licencja
- Creative Commons — Attribution — Noncommercial
I was looking on Printables and Maker world for a way to display these Lego monster jam trucks and there weren't any designs, so I spent a night designing my own.
The final product is a simple wall mounted hanger that can grab the front or rear wheels, the wheels can easily be slid into place but the connection is snug enough to prevent the truck from sliding around or falling out.
The holes for the screws are 4mm in diameter and beveled on the end so the head of the screw head can sit flush. The screws can not be seen with the truck on the display.
You can also use double sided tape or command strips if you aren't able to screw anything into your walls and the empty holes for the screws will not be visible.
Use the auto orient tool in your slicer and print with no supports.
Feel free to comment any tips, trick, or printing advice.
Please do not sell this model.