JagerGlock - The mini Jager Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props
- Licencja
- Creative Commons — Public Domain
I made this model for a gag gift, it isn't very practical. It permanently encases 3, 20ml Jagermeister nips in a Vaguely Glock shaped block of plastic. Only one of the Jager bottles can be opened unless your recipient wants to tear their cool gift apart.
Print with the 'Windows' down on the build plate and create a pause in your print just before the Jager cut-outs start to bridge over. Make sure your bridge settings are really good for your filament. I used "Thick Bridges" and slowed the first layer wayyyyy down.
I used 4 walls with 100% infill on a 0.4mm nozzle so that my bridging would be successful. Using too many walls will result in your bridging trying to attach to thin air!!!