Nemesis Retaliation board game insert (remix)slight shrink
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of Nemesis Retaliation insert by gameyspirits to reduce size slightly
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 36
- Wydruki
- 0
- Wyświetlenia
- 1099
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Board Games
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of gameyspirits design, solely because the original design wouldn't fit in my box.
If you find that you can fit the cardholders + room/corridor tray + token tray (turned the long way) across your box, then you don't need this redesign. The only things you might want are:
slightly shrunk top tray for corridor box - makes it easier to slide into the lower box
smaller spacer box - makes it easier to fit in the character boards. Also can hold the lander, but your choice on that.
My issue was that the token trays wouldn't fit and I didn't have the filament to re-engineer them to squeeze out a few mm. So I rotated the token tray by 90 degrees and slid it into the corner where the original doors box went. That meant that i needed to re-build all the boxes across the top side of the box, over to the backpacks tray, which i didn't touch.
Starting from the tokens, I tightened down the doors and corpse boxes, moving the lander to the spacer box. Then shrunk the dice/marker box, then re-engineered the aa-o2-luckydie box.
It sounds like most people aren't hitting the issue I had, but just in case, here's my work.