Older Sears Craftsman Vacuum Modification to use newer filters.
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Older vacuum that uses harder to find and more expensive filter to use newer more common filter
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 44
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution
My vacuum is 40+ years old, so the filter supply is nearly obsolete and more costly when found. I adapted a newer VF400 / VF500 style 5-20 gallon filter. The printed part is very simple, just a spacer. I did this a long time ago and as I remember I replaced the original bolt with a longer stainless-steel bolt, washer and nut. The printed spacer goes over the screw, washer and nut, then the filter goes on. Use a SS washer and the original plastic nut or equivalent to tighten the end of the filter down. The spacer will not allow the rubber from the filter to stretch down too far and possibly damage the filter. Use basic printer settings. Support recommended.