Open frame SD GP GPX
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Frame for holding a metal detector
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 80
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
A bracket to allow testing and operation of Minelab SD, GP and GPX series metal detectors, without the case fitted. Will NOT fit a GPX6000 or GPZ7000
Allows easy access to the circuit board or boards for testing, adjustment and modification. Uses eight of the original case screws.
Without the metal case, there is an increase in external electro-magnetic interference.
Model made with Blender, based on the original Minelab metal case.
Probably best in PETG or something durable and slightly flexible. You will need to print two. Printed vertically it needs no support, and also makes a useful test of wall precision.
Thanks to Woody at https://www.youtube.com/@DetectorMods for expressing a need for something like this.