Leveling prism [VESA for Jungheinrich EFG]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Alignment prism for the inclined column of the Jungheinrich EFG series forklift truck for the right column - for VESA.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 115
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Engineering
- Licencja
- Creative Commons — Attribution — Share Alike
Leveling prism for the inclined column of the Jungheinrich EFG series forklift. It is intended for mounting on the right side. The purpose of the accessory is to obtain a flat surface for VESA mounting.
Varaiants:
VZV JUN EFG - Leveling prism
Compensates for horizontal and vertical skew.
VZV JUN EFG - Prism (without horizontal alignment)
Suitable if you want to use a holder that has a 360° joint and you want to secure the lock on your own holder.It has some advantages, but these holders often have a shorter lifespan in forklifts.
Print:
I recommend printing on ASA.
The truck has a heater 30cm below the holder - If you can find a handy warehouse worker who can turn the outlet of the heater hole onto the holder, PLA and PETG will melt.
The same problem if the forklift is driven outside the warehouse or is not covered (without glass) - it drives outside in the winter or the sun shines on it through the glass in the summer.
Installation:
It is intended for the right column.
It is compatible with the entire EFG forklift series.
The assembly takes place on the integrated guide rail in the forklift
- two screws must be assigned.
