Noble NB4 Cover with Logo
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remixed the Flysky Noble NB4 Cover to have a nice Logo and some minor improvements.I printed the Cover with "Initial…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 70
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial
Remixed the Flysky Noble NB4 Cover to have a nice Logo and some minor improvements.
I printed the Cover with "Initial Layer Width" and "Initial Layer Flow" set to 70%. "Top/Bottom Line Directions" set to [90,180,45,135]. "Bottom Layers" 14 This will result in a gap between the first layer lines (see photos) and give you a nice surface finish (looks better in real than on the photos).
The Logo needs to be printed in "Layer Height" 0.1 and "Horizontal Expansion" -0.2 in Cura. It should have a accurately fitting; I had to press fit it into the Cover and fix it with a bit glue. Tip: Print the first few layers of the logo (the ground plate) with black filament and the rest (the Logo itself) with white filament if your printer is able to pause the print and change the filament on the fly.
I also highly recommend to use a protecting foil on the screen. I bought this one on Amazon: BROTECT Protective Film Compatible with Flysky FS-NB4
I took the logo from this user: https://www.thingiverse.com/thing:3837492
Print Settings
Printer:
Sidewinder X1
Rafts:
Doesn't Matter
Supports:
Doesn't Matter
Resolution:
0.1
Infill:
30
Category: R/C Vehicles