Team Corally Steering Bellcrank
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This part broke after the car hit against an obstacle. Disgned this quick'n'dirty and will use it until the next…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 28
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
This part broke after the car hit against an obstacle. Disgned this quick'n'dirty and will use it until the next order. The original spare parts costs just a few bucks. Replaces one part in this set: C-00180-036 I removed the stairs effect from the 0.2 layers with sand paper. Maybe it's a good idea to try 0.1 layer next time.
UPDATE: One hard crash later, I had print another one in 0.1 and I definitely recommend this. Took me at 60 mm/s around 75 minutes to print.
UPDATE 2: After another crash, I reinforced it ab bit and printed in ABS.
UPDATE 3: Pritning in ABS did not make any difference, it brakes at the same spot. So created Version 2 to be more robust and back to PLA.
UPDATE 4: If Version 2 does not fit in your steering setup, try Version 3. :D
UPDATE 5: Added Version 4.
Print Settings
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.1 - 0.2
Infill:
100
Category: R/C Vehicles