Team Corally Wheel Hex Adapter Protector
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Corally does not use closed wheel nuts and after touching a wall several times, the Wheel Hex Adapter and the nut is…
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 7
- Wydruki
- 0
- Wyświetlenia
- 37
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Corally does not use closed wheel nuts and after touching a wall several times, the Wheel Hex Adapter and the nut is pretty damaged on my car. I designed this to protect it.
Printed in TPU with a tight fit. Since I mounted it, I never lost one.
EDIT: Uploaded Version 2. Print one and check if it fits. If not, play with "Horizontal Expension" Feature in Cura. Good value to start is 0.1 mm (negative or positive).
Print Settings
Printer:
Sidewinder X1
Rafts:
Doesn't Matter
Supports:
No
Resolution:
0.1
Infill:
100%
Notes:
xtrudr® TPU hard Shore D58
Category: R/C Vehicles