Team Corally Center Diff Spacer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Recently I bought a new Motor Bulkhead for my Corally Python. But this one is dedicated for another Corally car which…
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 41
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution
Recently I bought a new Motor Bulkhead for my Corally Python. But this one is dedicated for another Corally car which is 4mm higher than the original one. Corally sell this spacer as well, but it was much faster to design and print it by myself.
Motor Bulkead Python: C-00180-176 Motor Bulkead V2: C-00180-605 Corally spacer: C-00180-562
After printing several times, I realized that it is hard to print one which fits 100%. That's why I designed this spacer to be a bit larger than needed. So I can use sandpaper to grind carefully some material from the bottom until the Diff sits perfectly level. Push the bearing on each side of the Diff from the top to find out if it sits level in the bulkheads.
Print in ABS as this region is getting really hot!
Print Settings
Printer:
Sidewinder X1
Rafts:
Yes
Supports:
No
Resolution:
0.1
Infill:
100%
Category: R/C Vehicles