1 / 2
Tile / glass breaker for Knipex pliers wrench 250mm — zdjęcie 1
1 / 2

Tile / glass breaker for Knipex pliers wrench 250mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Tile or glass breaking attachment for the jaws of the Knipex 250mm pliers wrench.

Ocena
0 / 5
Polubienia
11
Pobrania
18
Wydruki
0
Wyświetlenia
142
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Sometimes a tile or glass breaker would come in handy for the odd corner or small notch.
I adapted my model of the jaw protectors into a tile breaker, the parallel action of the Knipex pliers wrench is ideal for this purpose.
The lower jaw has a small piece of 4mm steel as the breaking pivot. My idea was that it will help to make a clean break, if the pressure point is wel defined. 

Printing
I printed in PETG 0.6mm nozzle 0.25 layer height. Print as oriented in the file, no supports necessary.
With good bed adhesion a brim was not needed.
I think I used 40% infill, which is strong enough so far.

Assembly
Cut a 25mm piece of 4mm diameter steel, from e.g. a screw or a rod.
Push the piece of steel in the slot of the lower jaw, I tried to make it press fit. Otherwise glue it in.

Use
Score the tile or glass where it needs to break. Place the lower jaw on the opposite site, directly below the score line and squeeze. There is a small indicator arrow on the front of the upper jaw to help alignment.

Bart

Link to previous model: https://www.printables.com/model/419132-knipex-pliers-wrench-jaw-protectors-250mm

Tagi