Mazda BF 323 headlight plastic replacments
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
replacement pieces for headlight adjustment system on a BF mazda 323.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 100
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
Most of these pieces are NLA or have a long lead time from Mazda.
all the bushings are quite straightforward. Print solid from a heat resistant plastic like ABS or PETG. Bushing 2 there are 2 variants, one with threads and one without. Either print I'd recommend running an M6 tap thru the print before use.
The adjuster will require you to re-use the existing steel hardware, but all the pieces should mix and match with the stock parts. For instance if your worm gear is in good shape, you can still use it with the rest of these 3d printed parts. There are no threads modeled into the gear, you'll need to run a M6 tap thru it.