Pottery Wheel Zona Paper Dice Sander
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mini pottery wheel dice sander for use with zona papers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 77
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Share Alike
Uses an equivalent mini pottery wheel to the kind found on Amazon as well as the combination of 1/8" thick acrylic disks and zona papers.
Design includes options for the 6 inch disks or the smaller 4 inch disks.
You'll also need 6x2 magnets. 8 per disk base, and 8 per disk holder.
I found that you can get 1 of each size from a single zona sheet. I cut the paper slightly larger than the disk so that the paper is friction fit into the disk holder, then trim the excess.
Print as many of the disk holders as you need to be able to quickly swap them out per your sanding needs. 6 of each size covers all grits. You only need one of each size disk base to attach to the pottery wheel.
When using water to wet sand, keep an eye on the "full" line on the bowl. Once the water exceeds this line, you risk wetting your pottery wheel motor and potentially destroying it. The bowl contains a lip for easily draining any accumulated liquids. I use a couple of double-sided sticky tapes to keep the bowl attached to the pottery wheel.
Bonus: with the disk holder off, you can stick some standard sandpaper on it for extra grit (see photos).