1 / 7
Perfektní držák na izolepu- Best adhesive tape holder!! — zdjęcie 1
1 / 7

Perfektní držák na izolepu- Best adhesive tape holder!!

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

1,43 € – 1,75 € netto (bez VAT)

Dla pliku: Adhesive tape holder_0.4n_0.2mm_PLA_MK4S_1h15m.bgcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 1,59 € netto (środek widełek).

Masa podana przez autora
27 g
Czas druku podany przez autora
1,25 godz.
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

Must have! A few grams of filament and an hour of printing and the result is pure perfection! Try it yourself!

Ocena
4,5 / 5
Polubienia
11
Pobrania
43
Wydruki
2
Wyświetlenia
189
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Office
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

printed with only a few supports (you have to draw them yourself where they should be, see the picture from PrusaSlicer, and they come off super nicely if you use the support settings like I did), fully functional, perfect design, for many types of adhesive tapes! All settings you need for this are on pictures.

Feel free to ask anything <3


If you like my model, please be so kind as to upload your own and I would be happy if you would rate it too.

Tagi