1 / 3
Nerdminer Case
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution — Noncommercial
The first Nerdminer is broken, I dropped it and the acrylic glass cracked and didn't provide any real protection.
That's why I made a case myself.
There are already some, but they were too simple for me.
If you have already assembled your Nerdminer, it is ready for installation.
Finished with the acrylic glass and the screws, you just click it into the housing.
Finally, place the frame on top and fasten the frame with mini screws or mini nails.
I had mini screws there and it holds very well, see photos.
I hope you like it.
Leave a Like and a make.
Let's print, best regards, Ray