Bird toy with 3 jingle bells
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bird toy with room for three jingle bells and designed to fit branches thinner than 20 mm in diameter.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 108
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
To be used by small birds like budgies because larger birds will easily chew through the bars.
The best size for jingle bells is between 12 to 20 mm. The larger bells need to be placed while the printer is running and when the cage is large enough to fit the bell. It may also be possible to use a heat gun afterwards to soften the plastic and place the jingle bells.
Sucessfully printed in PETG and nylon
Notes
Difficult to print because of the lack of support and the toughness of PETG.
Supports can't be used throughout the whole object because of in-print placement of jinglebells.
0,4 mm nozzle - keep separation between object and support to 0,5 mm because of the layer adhesion.
Needs some cleaning up with a knife afterwards because of the steep bridges.
Use a heatgun to gently remove the stringing.