1 / 15
Audi A2 8Z0 1999-2005 CupHolder — zdjęcie 1
1 / 15

Audi A2 8Z0 1999-2005 CupHolder

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Audi A2 cupholder replacement of the original plastic

Ocena
0 / 5
Polubienia
13
Pobrania
104
Wydruki
0
Wyświetlenia
915
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Standard Digital File License

Cup holder from Audi A2 – the main plastic Cup holder from Audi A2 – the main plastic part that holds the entire container.

It's still a work in progress; I've printed 7 prototypes so far. The rear rails and cutouts fit perfectly now, but there's still an issue with the front clips – they break off most often, even on the original holder, due to their design.

I printed it in PETG, but ABS or ASA would be much better.

Maybe someone else will want to tinker with it further. If I find the time, I'll finish it and upload an update.

Greetings to all you printing maniacs!

Edit 06.01.2026

The geometry and attachments have been slightly improved, I haven't printed them yet, if there are any corrections I will edit the model again and write.

Edit 12.01.2026

Hey guys, I finally finished this little project! It’s not 100% perfect—more like 97%. I recommend printing it vertically it makes the clips much stronger and the whole thing looks better. You can see in the photos that I didn't dry my filament properly, but it’s still decent. I’ll aim for a truly professional look next time! :P

If you look closely at the photos, I messed up the length of the model slightly, so the mechanism doesn't run smoothly, but I’ve already fixed that in the files. Let me know if you have any questions! Cheers

Tagi