1 / 5
LEGO Liebherr Counterweight 80428 – Hollow Weighted Stack for Technic LR 13000 (42146) — zdjęcie 1
1 / 5

LEGO Liebherr Counterweight 80428 – Hollow Weighted Stack for Technic LR 13000 (42146)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Hollow replacement counterweight for LEGO Technic 80428. Fill with lead and glue the top cap for a more stable LR 13000

Ocena
0 / 5
Polubienia
8
Pobrania
94
Wydruki
0
Wyświetlenia
488
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Building Toys
Licencja
Creative Commons — Attribution — Noncommercial

LEGO Technic Weighted Counterweight – Part 80428 (Liebherr LR 13000 - #42146)

The original LEGO Technic counterweight for the Liebherr Crawler Crane LR 13000 - #42146 relies on stacking identical solid elements. While visually accurate, the total mass is limited, which can reduce stability when lifting heavy loads or extending the boom.

This model is a hollow replacement version of the 80428 counterweight stack, designed to be:

  • 3D printed

  • Filled with lead weights / shot

  • Sealed by gluing the top weight in place

The result is a counterweight that looks correct on the model but provides significantly more mass, improving crane stability without external mods.


Design concept

  • Internal cavity sized for loose lead weights or shot

  • Top piece acts as a cap and is glued after filling

  • Exterior dimensions match the stacked weight appearance

  • Intended as a display and functional stability mod


Printing recommendations (FDM)

  • Material: PETG or PLA

  • Layer height: 0.20 mm

  • Perimeters: 3–4

  • Infill: 10–20% (shell strength matters more than infill)

  • Supports: Yes

  • Orientation: Print upright as designed


Assembly

  1. Print the hollow weight body

  2. Fill with lead weights / lead shot to desired mass

  3. Apply glue (CA or epoxy) to the mating surface

  4. Glue the final top weight in place

  5. Allow full cure before mounting on the crane


Important safety note

This model is intended for adult builders and display models.
Lead is toxic — handle with care, wash hands after handling, and keep away from children.

This is a non-official LEGO modification and is not affiliated with or endorsed by the LEGO Group.


Changelog

  • v1.0 – Initial release

Tagi