Chitu E1 Dessicant Box Loading Helper - No Supports
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Remix of existing model to eliminate the need for supports while printing.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 23
- Wydruki
- 0
- Wyświetlenia
- 207
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Remixed dessicant box loading tool. Should print without supports in the orientation suggested if your printer can handle 60 degree overhangs; only unsupported portions are the "tops" of the feeding slots, which should just be an easy bridge.
Added some guides to direct the beads into the holes, I'm undecided on their usefulness, so there's also a version without the guides. Update: I've found that in my experience the guides are more often annoying than they are helpful, so you should probably go for the non-guide version. YMMV though, so I'm not taking down the guided version and it shall remain here as an option.
Dessicant Boxes this is intended for: