the pretty pretty filament fixture
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print two of these and get a rod/tube up to 32mm (1.25 inch) from a hardware store for a functional filament holder.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 28
- Wydruki
- 0
- Wyświetlenia
- 569
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
Designed to be a good looking and mechanically sound filament storage solution.
The basic setup is printing two mounts and sourcing a rod on which filament spools can be hung on. If you mount it above your printer it's very handy. You can feed the filament directly from the holder to the printer so no swapping rolls!
It has four screw holes for mounting. The part is very strong (proof in the photos) just make sure to use a strong enough tube/rod.
Includes a standard one which fits 1kg spools, and a big version for 2.5kg spools.
Does not need any supports. I printed with PETG, but if you have problems with overhangs PLA might be better.
Short video (skip to 23s):