Wargaming Scale Razor Wire / Concertina Wire
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Very old file I made to throw together some concertina wire for my tabletop figures.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 43
- Wydruki
- 0
- Wyświetlenia
- 148
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Props & Terrains
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a very old model I made as a substitute for all the other wargaming miniature razor wire options I had seen before. This prints a very long section that can be cut to any lengths needed.
As you can see in the closeup of the 3d model, I made sure to include an emulation of the wire reinforcement that some of the better real razor wires have. This was partially because I am a stickler for details, but also helps make the wire stay in place when you want it to. With that said, it can also make it more fragile if bent while at room temperature.
If you print in PLA, it is thin enough to soak in hot water so it becomes much more accepting to bending and twisting. Then, you can twist it around an object such as a marker or similar cylindrical item and you will end up with a nice coiled section of razor wire.
1 - Print it
2 - Twist it around something hot off the print bed.
3 - Fog it with some silver paint
4 - Profit?
This will likely be a good cheap alternative to some of the other razor wire options people have been using for WMH, 40K, and any other miniatures gaming/modeling/dioramas. As much as I love the brass laser cut stuff they make, you can actually cut yourself on it and it is very expensive. The other option I found was the wire around a wire method you see in the picture above and I really don't find it very convincing.If you make one and use it, please post a picture! I'd love to see what interesting things people will use it for.