1 / 8
CheeseMix Plate (Blank Corner) 2x2 to 14x14 — zdjęcie 1
1 / 8

CheeseMix Plate (Blank Corner) 2x2 to 14x14

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Grid plate for cameras rigging and accessories.

Ocena
0 / 5
Polubienia
6
Wydruki
0
Wyświetlenia
216
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Standard Digital File License

CheeseMix is a 3d printable rigging grid for photographers and videographers.

This plate pack contains "Blank Corner" plates, sizes 2x2 to 14x14.

The double-sided hole pattern is based on a 9mm grid. Holes are 18mm apart with a second grid of upside-down holes located in the centers of each grid section. Plates can be bolted together, to cages etc. using 1/4-20 hardware. Hex nuts can be inserted into the top or bottom of the grid for a secure mounting point. Around each mounting point are holes compatible with 3mm anti twist pins. Plates are 9mm thick.

This is the "Blank Corner" plate set, the difference from the "Corner  Hole" set is depicted bellow.

There are some duplicates between sets. Its a bit of a brain twister to convert equivalent plates between sets so I have posted each full set for convenience.

This set contains 91 plates. I have left out duplicates within the set, for example 12x7 is the same as 7x12 when flipped upside down then rotated 90 degrees. The set is handed however. Along the X axis, from the origin corner the holes point down and along Y they point up. If you need the other handed plate simply mirror the plate vertically in your slicer.

Printing

Layer Height

0.2mm

Walls

3 or more

Top/Bottom

3 or more

Infill

25% or more

Support

No

CheeseMix is designed for 1/4-20 hardware. The main fastener is a 0.5" (1/2) long cap screw with a head Diameter of 0.375 (3/8) and a head thickness of 0.125" (1/8). The bolt head sits bellow the surface of the plate, recessed in the hex pockets. Nuts should be 7/16 flat to flat and 0.1875" (3/16) thick, or less, to sit bellow the surface of the plate.

Tagi