1 / 1
Raised Jugger Buckler Handle for 14mm and 12mm Carbon tubes (opposite order) — zdjęcie 1

Raised Jugger Buckler Handle for 14mm and 12mm Carbon tubes (opposite order)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Buckler Handle for Jugger shield. 2 per shield, fitted with 14mm and 12mm Carbon tubes and epoxied to the EPP plate.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Public Domain

I print with extrudr flex hard/semisoft, 0.4mm nozzle, 0.3mm layerheight, standard flex filament settings, 15% cubic infill, 2 perimeters.

For the complete handle you need 120mm (for size L hands) 14/12 and 12/10 carbon fibre tubes.

Model is made for Right-handed juggers, mirror if neccessary.

I recommend cutting a shallow triangular depression about 6cm wide and 1cm deep into the EPP below the handle, it makes room for the fingers.

I epoxied a similar version to my shield, and it has held for more than a year now.

Tagi