1 / 6
Weinkühler - Bottel Cooler for different bottel sizes
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Two double-walled bottle cooler in a custom design
- Ocena
- 0 / 5
- Polubienia
- 5
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 101
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Bottles with a diameter of up to 10 cm can be kept cold for longer in the bottle cooler.
It is designed with double walls, so that an insulating layer of air is located between the bottle and
the outer wall.
The cooler has an extra thick bottom for better insulation.
The cooler consists of two parts, which can be easily assembled by pressing them together and can
be disassembled into two parts again for cleaning.
The model was designed using Fusion 360 and does not require support for printing.
The cooler was printed on a Bambu Lab H2D.