CNC Kitchen 90 Tips Gridfinity bin
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A gridfinity bin for CNC Kitchen 90 degrees thread insert tips
- Ocena
- 5 / 5
- Polubienia
- 8
- Pobrania
- 25
- Wydruki
- 2
- Wyświetlenia
- 106
- Oceny
- 2
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution
This is a gridfinity bin for storing the new 90 degrees thread insert tips.
UPDATE
With the release of the M4-M8 tips I made new bins. First I made the full kit in a 1x2 bin, which I think is the most convenient one. However if you rather have only half of the kit or you’re getting one half at a time there’s also and individual bin for each half so you don’t have to throw the first one you made or if you prefernto stack them. If the latter is your preference you can find spacers here https://thangs.com/designer/bigbrisco/3d-model/%23Gridfinity%20Height%20Adaptive%20Spacers-61820
The M4-M8 bin resulted in a higher bin than the original M2-M3 one so I remade it to match heights but the original shallower one is still here.