Elegoo Centauri Carbon Vented Riser Corner With Humidity and Temp
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Adds an inexpensive humidity/temp sensor to the Front Left/Right corner. Drop in replacement for the original corner.
- Ocena
- 5 / 5
- Polubienia
- 69
- Pobrania
- 355
- Wydruki
- 2
- Wyświetlenia
- 1852
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
The original design is of course, required for every ECC. I wanted to add a slot to install an inexpensive Humidity/Temp sensor that I could see from my desk. Simply used Fusion360 to cut a tiered slot into the original model's Front Left corner. The sensor sampling slots dictated that I use the Left side to sample chamber air. Seal is pretty tight, I guess you could use foam or glue to make it super airtight. Temp seems to match the displayed value on the ECC, I just wanted to see humidity at a glance.
Using Tree Supports worked well for me.
Update 1/6/2026: Added a second model for the Right Front