Hornady Lock n Load Primer Tube Cap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This redesigns the primer tube cap to allow the insert of primers tubes from the top for easy loading of primers.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 144
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Sports
- Licencja
- Creative Commons — Attribution
This is a redesign of the primer tube cap that is included with the Hornady Lock n Load AP. This model extends both the "legs" and the top allowing the insertion of primers tubes (Hornady, DAA etc) while keeping to the same original Hornady design aesthetics.
*Note, this was designed for and printed in ABS, as such, hole dimensions might be off if printed in other materials as I designed this for ABS shrinkage. Ive included the .f3d file with the parametric settings still applied if you need to adjust diameter, you can do so on the initial sketch
Print Settings
ABS
.4 nozzle/line width
2 walls, 4 top/bottom
50% infill cubic