Big Lego Christmas Tree
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Lego Inspired christmas tree about 30cm (1 foot) tall.
- Ocena
- 0 / 5
- Polubienia
- 22
- Pobrania
- 48
- Wydruki
- 0
- Wyświetlenia
- 364
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Winter & Christmas & New Year's
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Lego Inspired christmas tree
Small tree to put anywhere you want to keep the christmas spirit.
Designed to not need glue or supports*. (could not get the star to be without supports without making it more complicated than it needs to be or way bigger. )
all parts are oriented the correct way and will fit on any printer same or bigger than te Prusa MK3/4/S/+.
Tree is about 30cm (1 foot) tall.
Scale is about 3,75:1.
community challange
add more ornaments
improve the design
share you thoughts and results
assemly tips
there are small flat surfaces on the pieces to keep the tops of the studs from spinning.
the ornaments can be placed on the bottom of the leaves.
some of the stud tops may be loose, you can add a bit of glue if you want but is not needed.
the studs may rotate, a bit of tape fill fix this.
printer/settings
Prusa MK4S
0.2 mm structural
support is only needed to print the star.
Filaments used
ESUN PLA+ Pine green
ESUN PLA+ Blue
Prusament PLA Pineapple Yellow
Prusament PLA Simply Green
Prusament PLA Lipstick Red