T Spool Holder for Prusa printers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
If you like the design of Prusa's T-bar spool holder but did not get one, you can print yourself a substitute.
- Ocena
- 5 / 5
- Polubienia
- 33
- Pobrania
- 353
- Wydruki
- 3
- Wyświetlenia
- 1604
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution
If you like the design of Prusa's T-bar spool holder but did not get one, you can print yourself a substitute. You won't get the same rigidity as the injection molded one but it should be functional.
The design prints in 4 parts that you can glue together. Mine fits well without glue. Print this design on a smooth PEI build plate rather than a textured one.
There is a variant for the arms that has a higher torsional stiffness but may look less nice (always a matter of tastes there).
It's recommended to use full honeycomb infill for the arms and PLA is not a recommended material for this as it will slowly creep under load (mine is printed in ASA).
There is also a step file if you want to taylor or improve it
Print instructions
Category: 3D Printer Accessories