LED Lamp Kit 001 - Minecraft Ore Lamp - New Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I made an adapter for the LED Lamp Kit 001, for the amazing model by Rauks (@Rauks_3369037) of a Minecraft Ore
- Ocena
- 4,842 / 5
- Polubienia
- 739
- Pobrania
- 1363
- Wydruki
- 18
- Wyświetlenia
- 10 047
- Oceny
- 19
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution
Material: PLA/ABS/PETG
Parts list:
X1 - LED Lamp Kit-001 Adapter Base
X1 - diffuser
X2 - ore-side_12
X1 - ore-side_3
X1 - ore-side_4
X1 - ore-top
Assembly instructions:
Thread the lamp cable through the hole in this direction

Position the lamp so that the cable is aligned with the notch

Insert the lamp into the adapter.

Note: The dimensions of the lamps in the kit are not always uniform. You can add adhesive tape around the lamp so that it fits tightly if necessary.

Thread the cable through the channel.

Snap the diffuser onto the adapter.
Note: Do not press too hard on the diffuser; it is very thin and may break.
At this stage, you already have a functioning lamp.

Assemble the walls and the TOP, and slide them over the diffuser.



