Unifi UCG-Max powerbrick 10-inch rack mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
2U rack mount for the Cloud Gateway Max' powerbrick. With Lomax1983's WAGO221 holder and ziptie tie-ins.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 35
- Wydruki
- 0
- Wyświetlenia
- 454
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
As for my Unifi PoE-injector I want to get rid of as much cableclutter as possible in my 10-inch rack so I designed this 2U 10" rackmount for the UCG-Max' powerbrick.
I could have made it as a 1U, but I'd rather have the extra breathing room and create a pathway for airflow when I inevitably will install a fan.
I added a WAGO221 holder based on the measurements from Lomax' model (see below) such that I can splice the cables from both the PoE-injector as well as the powerbrick and join them into one cable that goes to my thomann the t.racks Power 3 USB.
I made indents to be able to create a lid for this part down the line, but the WAGO's fit snug enough as is.
Disclaimer:
By using this model, you acknowledge and agree that you do so at your own risk. This design is provided "as is" without any warranties of any kind.
The manipulation, routing, or housing of power cables involves inherent risks, including but not limited to electrical shock, short circuits, and fire hazards. It is your responsibility to ensure that:
Your 3D printing materials (such as filaments) meet necessary thermal and fire-retardant standards (e.g., UL 94 ratings).
The printed part does not compress, pinch, or damage cable insulation.
There is adequate ventilation to prevent heat buildup.
All electrical work complies with your local building codes and safety regulations.
The designer shall not be held liable for any damages, injuries, or losses resulting from the use or misuse of this design. If you are unsure about electrical safety, please consult a licensed professional.