Commodore PET KL-4M sound card case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is really niche....I managed to get a KL-4M sound card for my Commodore PET and was slightly wary of the…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 17
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
This is really niche....
I managed to get a KL-4M sound card for my Commodore PET and was slightly wary of the electronics being exposed to the air and me shorting something across the PCB so I made a case for it.
There's a case, a plain lid and a lid which has text which can be printed using a multi-colour printer; I used my Prusa MK3S with MMU2S.
Design is in Fusion 360 and the original Fusion file is shared here too.
The holes/nuts are 3mm.
I hope it's of use to someone.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Yes
Supports:
Yes
Resolution:
0.2
Infill:
15%
Notes:
Use build plate supports to allow for good printing of the hex nut and screw spaces.
Category: Computer