1 / 2
Fishing Bait Lure Dryer/Spinner
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This is a rack I made for drying fishing lures. There are two versions, "Tension" and "Clip". Videos provided.
- Ocena
- 5 / 5
- Polubienia
- 63
- Pobrania
- 191
- Wydruki
- 1
- Wyświetlenia
- 1991
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
SzczegółyPliki (15)Wydruki i komentarze (Wydruki: 1) (Komentarze: 2)Remiksy (0)Kolekcje (83)Powiązane
I couldn't really find a rotating drying rack for baits that I liked, so decided to make one. You should be able to orient objects to print with no supports.
I pretty much printed everything at 0.2mm in PETG. Print the Motor Adaptor at 0.15mm or better for good threads.
I used:
- 2 ea - 608 bearings
- I used 2 of the 608 bearings, which you can get off old skateboard wheels, roller blades/skates, or Amazon. Also local sporting goods store might have them (assuming they sell skateboards/roller skates).
- 12v DC Motor (I used 10 RPM)
- 4 screws - M3 screws to attach the motor, 12mm long (you can use longer screws and add spacers/washers under the head of the bolt).
- Toggle Switch (any On/Off toggle switch would work, but I made the mounting hole 12.5mm (½ in).
- DC power jack
- The mounting hole for this is 11mm (7/16 in)
- 12v power supply
- I think you only need like 2 Amps at most. (12vDC, 24 Watts)
There are two versions, Tension and Clip (see videos below):
- Tension: The style typically used, I used rubber bands and paper clips to suspend the baits. (Pic is before I mounted the switch)
- 175mm - Fits Prusa Mini
- 205mm - Fits MK3 series , Ender 3/5, etc
- Clip: This can hold baits with bills using a medium binder clip
- 175mm - Fits Prusa Mini
- 205mm - Fits MK3 series , Ender 3/5, etc