1 / 19
Whistle with Sticker Bezel (Printing Tips and .3mf) — zdjęcie 1
1 / 19

Whistle with Sticker Bezel (Printing Tips and .3mf)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A loud, compact whistle remake with lots of printing tips! Make lots of whistles!

Ocena
0 / 5
Polubienia
2
Pobrania
12
Wydruki
0
Wyświetlenia
48
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Original by: @ThreeD-Michael

https://www.thingiverse.com/ThreeD-Michael/designs

Remix by @CriptasticHacker

Please leave a ❤if you like this design.  It makes me happy :)

My website:

https://cripsrise.neocities.org/

https://hackaday.io/CriptasticHacker

https://www.youtube.com/@CriptasticHacker

 

These whistles are loud, robust, and amazing.  But I wanted an option to add a sticker design, so I added a little bezel around the top.

I also wanted to print a bunch of these FAST.  But default Prusa Slicer and Orcaslicer has bridging errors.

The trick was to change the bridging infill direction to 180 degrees.

See attached image for how to do this.

 

These print great in any PLA! 

Attached are 3mf files for easy printing, including the bed fill of 12x whistles

No Supports Needed.  But there is a bevel on the bottom so good bed adhesion is key.

I have a very clean PEI build plate and print with the lid on to retain heat inside (makes a big difference for prints sticking when not using gluestick).

Printed on Creality K1C with "expert mode" to enable -0.025mm Z offset for best bed adhesion (squish)

Layer height = 0.3mm.

Temp = 235 c

Bed = 60 c

Standard speeds

consider turning on ironing (I didn't) for a more prestine print

 

For the sticker, the label is 11mm x 38mm with 1.5mm radius

I attached a Silhouette Cameo file with a full sticker sheet to use.

 

Tagi