18V Ryobi Battery Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ryobi 18V battery adapter for use on its own or on 3D model design.
- Ocena
- 5 / 5
- Polubienia
- 22
- Pobrania
- 117
- Wydruki
- 0
- Wyświetlenia
- 568
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Description
The Ryobi 18V Battery Adapter's purpose is to make the implementation of an 18V Ryobi battery to any project or 3D model easier.
Print Settings
I was able to print this model in default settings with support enabled standing upright, or laying on its side with no problems.
Bill of Materials
Parts are linked from Amazon since that’s where I purchased them, but they’re mainly shown for identification. Equivalent parts can be found from other sellers, often at lower prices, so use whatever sources make sense for you.
Assembly
Once the model has printed, you should be able to slide the two leaf spring battery contacts into place with a reasonable amount of force (See picture below).
