1 / 5
Crash Derby - Sherman Tank (WWII) — zdjęcie 1
1 / 5

Crash Derby - Sherman Tank (WWII)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Orientacyjna cena wydruku pliku

0,74 € – 0,91 € netto (bez VAT)

Dla pliku: 1A TANK.gcode

To wstępna wycena jednego pliku. Dokładną cenę poznasz przed zamówieniem.

Plik i założenia wyceny

Plik użyty do wyceny

Średnia wycena orientacyjna: 0,82 € netto (środek widełek).

Masa podana przez autora
20 g
Czas druku podany przez autora
21,6 min
Materiał u źródła
PLA
Materiał wyceny
PLA
Drukarka wyceny
Bambu Lab P1S - 0.4 nozzle
Proces wyceny
0.20mm Standard

Orientacyjna wycena wyłącznie wybranego pliku, oparta na masie i czasie druku podanych przez autora. Warianty plików nie są sumowane. Ostateczna cena zostanie obliczona po analizie pliku.

Zapisane na tym urządzeniu.

This Crash Derby Sherman Tank will dominate based on its 76 mm gun, 30 tons, maneuverability, speed & low cost ($30K)

Ocena
0 / 5
Polubienia
5
Pobrania
15
Wydruki
0
Wyświetlenia
91
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Board Games
Licencja
Creative Commons — Attribution

I uploaded orthographic views of this primary USA World War II tank that was used extensively.  I thought it would be a psychologically dominant contender in the Crash Derby and trust that it will not be outlawed due to its heavy weight (30 tons), track drive (which will roll over and crush the opposition), low cost ($30K in 1942), and high velocity armor piercing gun.

The design allows the gun to traverse 360 degrees by employing a 3mm rubber tube which has sufficient friction to keep the turret on the body.

I separated the turret from the body to reduce support and allow the turret to rotate.

The base is a single unit.  

The gun press fits into the turret and does not need glue.  I did super glued the tank assembly to the coin base.  The star is optional and requires glue.

Tagi